Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Registration plate issues | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake hose damaged | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp aim beam image too far to the left |1.6.4| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Rear Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) | 1 |
Nearside Rear Direction indicator not working (1.5.1c) | 1 |
Nearside Rear Exhaust mounting missing |7.1.1c| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Offside Front Fuel system component leaking |7.2.1a| | 1 |
Shock absorber likely to become detached washer on top right hand shock mount too small and other 3 washers missing |5.3.2 |a| |ii|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Stop lamp not working both brake lamps inop |4.3.1 |a| |ii|| | 1 |
Front Brake fluid contaminated |1.8 |a|| | 1 |
Nearside Rear Direction indicators not working blown bulb |1.5.1c| | 1 |
Offside Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Fuel system component leaking left carburetor |7.2.1a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake lagging in operation (1.2.1 (d)) | 1 |
Brake hose bulging under pressure (1.1.12 (d)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Wheel fixing missing |single fixing| Split pin missing from wheel nut |5.2.1 |a| |ii|| | 1 |