Most common failures | No# failures |
---|
Registration plate issues | 23 |
Headlamp aim out of alignment | 21 |
Rear reflector on motorcycle missing |1.4.1| | 18 |
Headlamp aim beam image kick up to the offside |1.6| | 15 |
Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Horn not working |1.7.3a| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Direction indicators flashing more than 120 times per minute all indicators too fast |1.5.1c| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicators not working |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Upper Exhaust has part of the system missing bolt missing on frame / hanger mounting |7.1.1a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Offside Front Handlebar deformed |2.1.1b| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Steering headbearing in such a condition that steering control is adversely affected headbearings locating in centre position |2.2.2 |f| |ii|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Nearside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Offside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front shock absorber seal failed and leaking oil Both |2.3.3| | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Footrest missing no full left hand foot rest (6.2.12 (a)) | 1 |
Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
Brake hose excessively deteriorated | 1 |