Most common failures | No# failures |
---|
Registration plate issues | 8 |
Horn not working |1.6.2a| | 7 |
Registration plate lamp issues | 6 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 4 |
Rear reflector missing |1.5.1a| | 4 |
Rear Rear position lamp|s| not working |1.1.A.3b| | 3 |
Offside Headlamp not working on main beam |1.7.5a| | 3 |
Parking brake efficiency below requirements |3.7.C.1b| | 3 |
Offside Rear Direction indicator not working |1.4.A.2c| | 2 |
Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Indicator tell tale inoperative |1.4.A.2a| | 2 |
Direction indicators not working |1.4.A.2c| | 2 |
Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.C.1a| | 2 |
Offside Obligatory mirror missing |8.1.1| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Rear Wheel insecure |4.2.A.1c| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Rear Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Speedometer not fitted |6.7.1| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Front Headlamp switch missing |1.7.1| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Parking brake not fitted on at least two wheels |3.1.1| | 1 |
Shock absorbers has an excessively worn bush All front shock upper and lower bushes (5.3.2 (c)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear front parking brake recording little or no effort |3.7.B.6a| | 1 |
Offside Rear Rear wheel bearing has excessive play (2.6.2) | 1 |
Nearside Rear Upper Integral body structure is fractured and structural rigidity is significantly reduced fendor mount (6.1.1 (a) (i)) | 1 |
Nearside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear Hydraulic brake calliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Rear Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Obligatory mirror missing |8.1.1| | 1 |
Front position lamp|s| missing |1.1.A.3a| | 1 |
Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Centre Rear reflector missing |1.5.1a| | 1 |
Offside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Indicator tell tale missing |1.4.A.2a| | 1 |
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
Rear Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
All direction indicators missing all front and rear (4.4.1 (a) (ii)) | 1 |
Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4) | 1 |
Horn not working (1.6.2a) | 1 |
Offside Rear wheel bearing has excessive play (2.6.2) | 1 |
Rear Rear reflector missing |1.5.1a| | 1 |
Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
Offside front brake recording little or no effort |3.7.B.5a| | 1 |
Centre Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Upper Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
Headlamp aim does not move downwards when dipped |British American headlamp| |1.8.C.4| | 1 |
Nearside Rear Wheel fitment excessively worn between the wheel and hub spigot mounting |4.2.B.5| | 1 |
Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Front Front position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |