Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 17 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 16 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 10 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 8 |
Horn not working |1.7.3a| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
Registration plate issues | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Steering lock stop ineffective |2.1.3| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Horn control not functioning. |1.7.2b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Brake hose damaged | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Exhaust is leaking and excessively noisey |Blowing on Manifold| |7.1.1b| | 1 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Headlamp aim not tested NO CLEAR PATTERN TO TEST AS SUCH |4.1.2 |b|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Road spring corroded so that its cross sectional area is reduced and seriously weakened |5.3.1 |b| |i|| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort needed adjusting up |3.3.A1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Rear wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Offside Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Motorcycle structure is so deformed it is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 1 |
Fuel cap missing |7.2.2a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering movement excessively notchy with the wheel raised (2.2.1b) | 1 |
Rear Brake lever has inadequate reserve travel (3.1.3b) | 1 |
Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Brake component has an inadequate repair rear brake adjuster
|3.1.5| | 1 |
Rear Brake pipe inadequately supported cable
|3.2.B2b| | 1 |
Nearside Rear Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Brake disc contaminated Oil/grease on disc |1.1.14 |b|| | 1 |
Front Brake hose excessively damaged |1.1.12 |b| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Wheel hub worn to the extent that wheel security is adversely affected Rear wheel insecure in hub (5.2.1 (b) (ii)) | 1 |
Front Fork yoke in such a condition that steering control is adversely affected excessive wear in joint. (2.2.2 (d) (ii)) | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Roller brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i|| | 1 |
Front Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure fairing and infill panel (6.1.1 (b) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Forks excessively deformed (2.2.2 (d) (i)) | 1 |