Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Horn not working |1.7.3a| | 3 |
Registration plate issues | 3 |
Brake hose excessively deteriorated | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Brake rod insecure |1.1.15 |c|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Throttle operating incorrectly grip loose |6.2.1f| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Centre Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front position lamp incorrect colour |1.1.2a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Brakes imbalanced across an axle | 1 |
Offside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Registration plate lamp issues | 1 |
Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Brake pipe likely to become detached or damaged rubbing on swing arm by rear hubs |1.1.11 |d| |ii|| | 1 |
Brake rod insecure brake master push rod lock nut loose |1.1.15 |c|| | 1 |
Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust silencer insecure MISSING |8.1.1 |b| |i|| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Offside Parking brake efficiency below requirements |3.7.B.7| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Parking brake efficiency below requirements |3.7.B.7| | 1 |
Front Direction indicators not working |1.4.A.2c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Front Front suspension has an inadequate repair of a load bearing member or its supporting structure. |2.3.8| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Central Front Upper Headlamp insecure headlamp insecure (4.1.1 (c)) | 1 |
Central Front Upper Headlamp lens seriously defective wrong bulb fitted causing complete loss of beam pattern (4.1.1 (b) (ii)) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |