>

MOT History from tests of petrol YAMAHA MAXIMs year 1982

Review the list of common YAMAHA MAXIM failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:76.74%
(The average a petrol YAMAHA MAXIM year 1982 passes without issue)
Based on:172 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment9
Registration plate issues4
Front shock absorber seal failed and leaking oil |2.3.3|2
Throttle operating incorrectly |6.2.1f|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2
Front wheel spindle securing nut locking device insecure |2.3.5a|1
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c|1
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c|1
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c|1
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c|1
Horn not working |1.7.3a|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Nearside Front Front position lamp|s| missing |1.1.A.3a|1
Offside Front Front position lamp|s| missing |1.1.A.3a|1
Nearside Stop lamp missing |1.2.1a|1
Offside Stop lamp missing |1.2.1a|1
Nearside Rear reflector missing |1.5.1a|1
Offside Rear reflector missing |1.5.1a|1
Nearside Rear position lamp|s| missing |1.1.A.3a|1
Offside Rear position lamp|s| missing |1.1.A.3a|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Front Brake hose which buldges |3.2.B4|1
Brake lever insecure |3.1.2a|1
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Seat insecure |6.2.1a|1
Brake lever has inadequate reserve travel |3.1.3b|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Offside Rear Brake pedal insecure |3.1.2a|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Drive chain excessively loose |6.2.1d|1
Drive chain worn to excess |6.2.1e|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front position lamp missing |1.1.1a|1
Hydraulic brake control feels spongy |3.1.4a|1
Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Front Front wheel spindle securing nut locking device missing |2.3.3a|1
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a|1
Front wheel bearings are excessively rough |2.3.5b|1
Offside Front Brake hose leaking fluid |3.2.B4|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front suspension assembly component excessively corroded. |2.3.1|1
Steering headbearing has excessive free play |2.2.2|1
Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Headlamp insecure |1.7.3|1
Nearside Front Direction indicator not working |1.4.A.2c|1
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Front wheel spindle securing nut locking device missing |2.3.5a|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Riders seat insecure |6.2.1a|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Nearside Front Shock absorbers has a serious fluid leak1
Stop lamp(s) not working from rear brakes (4.3.1 (a) (ii))1
Front Brake lever has insufficient reserve travel (1.1.2 (a))1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front wheel spindle securing nut locking device missing |2.3.3a|1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Nearside Front Stop lamp(s) not working (4.3.1 (a) (ii))1
Offside Front Stop lamp(s) not working (4.3.1 (a) (ii))1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Rear Stop lamp not working (4.3.1 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy