Most common failures | No# failures |
---|
Front Brake excessively binding |1.2.1 |f|| | 11 |
Registration plate lamp issues | 9 |
Headlamp aim out of alignment | 6 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Stop lamp remains on when the brakes are released | 4 |
Rear Brake excessively binding (1.2.1 (f)) | 4 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 4 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 4 |
Rear Brake excessively binding |1.2.1 |f|| | 3 |
Registration plate issues | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Front Brake lever is bent and the brake cannot be readily applied |1.1.2 |d|| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Rear brake disc in such a condition that it is seriously weakened | 2 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front Lower Brake excessively binding (1.2.1 (f)) | 2 |
Offside Rear Lower Brake excessively binding (1.2.1 (f)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Brake grabbing severely (1.2.1 (c)) | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Brake fluid contaminated |1.8 |a|| | 1 |
Rear Brake fluid contaminated |1.8 |a|| | 1 |
Offside Front Stop lamp does not emit a steady light front brake |1.3.1b| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Central Front Upper Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Brake excessively binding Front |1.2.1 |f|| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Front Brake disc contaminated Covered in fork oil. (1.1.14 (b)) | 1 |
Brake lever is so short that the brake cannot be readily applied sharp edge exposed (1.1.2 (d)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied rear brake lever very bent |3.1.3c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Brake component insecure Front pad pin locking device missing |1.1.21 |c|| | 1 |
Rear Brake caliper inadequately mounted (1.1.16 (c) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Rear Brake fluid contaminated (1.8 (a)) | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface NUMBER PLATE COVERING (4.8.1 (a) (ii)) | 1 |
Brake fluid contaminated FRONT AND REAR NEEDS REPLACING OLD AND CONTAMINATED (1.8 (a)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Roller brake test indicates a binding brake front wheel bearing not tested |3.3.A1a| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Steering headbearing excessively stiff or notchy notchy (2.2.2 (f) (i)) | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Front Brake caliper damaged Seized on (1.1.16 (a) (i)) | 1 |
Rear Brake caliper damaged Seized on (1.1.16 (a) (i)) | 1 |
Brake excessively binding Rear (1.2.1 (f)) | 1 |
Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
Throttle operating incorrectly sticking (6.2.7 (a) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Roller brake test indicates a binding brake wheel bearing not tested |3.3.A1a| | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
Brake performance not tested rear brakes are excessively worn beyond testing limitations (1.2.1 (g)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock front brake hits screen (2.1.4 (b)) | 1 |
Front Headlamp has more than 1/2 LEDs not functioning (4.1.1 (a) (ii)) | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Rear Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Offside Rear Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |