MOT History from tests of petrol YAMAHA JOGs year 1988

Review the list of common YAMAHA JOG failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history

Pass percent:79.10%

(The average a petrol YAMAHA JOG year 1988 passes without issue)

Based on:67 MOT Tests

Most common failures	No# failures
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Front Brake cable badly frayed \|3.2.A1b\|	1
Front Brake cable has a significantly damaged outer casing. \|3.2.A1b\|	1
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Brake back plate\|s\| insecure \|3.2.A1j\|	1
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Rear Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Front suspension assembly component excessively corroded. \|2.3.1\|	1
Rear Wheel has an excessively eccentric bead rim. \|4.2.2\|	1
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Horn not working (7.7 (a) (ii))	1
Headlamp aim out of alignment	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Headlamp insecure \|1.2.3b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Front Brake cable badly frayed \|3.2.A1b\|	1
Front Brake cable has a significantly damaged outer casing. \|3.2.A1b\|	1
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Brake back plate\|s\| insecure \|3.2.A1j\|	1
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Front Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Rear Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Front suspension assembly component excessively corroded. \|2.3.1\|	1
Rear Wheel has an excessively eccentric bead rim. \|4.2.2\|	1
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Horn not working (7.7 (a) (ii))	1
Headlamp aim out of alignment	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Headlamp insecure \|1.2.3b\|	1

MOT History from tests of petrol YAMAHA JOGs year 1988

Find us on Facebook