>

MOT History from tests of petrol YAMAHA GPD125-As year 2017

Review the list of common YAMAHA GPD125-A failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:86.15%
(The average a petrol YAMAHA GPD125-A year 2017 passes without issue)
Based on:4,223 MOT Tests
Most common failuresNo# failures
Stop lamp remains on when the brakes are released55
Headlamp aim out of alignment43
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))33
Rear Position lamp not working (4.2.1 (a))28
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))23
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))23
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))20
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))20
Rear Stop lamp not working (4.3.1 (a) (ii))20
Rear Shock absorber has negligible damping effect (5.3.2 (b))20
Horn not working (7.7 (a))19
Registration plate issues15
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))13
Front Wheel bearing rough when rotated (5.1.3 (b) (i))13
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b))13
Horn not working (7.7 (a) (ii))11
Nearside Front Position lamp not working (4.2.1 (a))11
Stop lamp not working (4.3.1 (a) (ii))11
Front Wheel bearing has excessive play (5.1.3 (a) (i))10
Offside Front Position lamp not working (4.2.1 (a))10
Registration plate lamp issues10
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))9
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))9
Front Position lamp not working (4.2.1 (a))9
Riders seat insecure (6.2.5 (a) (ii))9
Front Stop lamp not working (4.3.1 (a) (ii))9
Nearside Front Direction indicator incorrect colour (4.4.3 (a))9
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))8
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))8
Offside Front Direction indicator incorrect colour (4.4.3 (a))8
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b))8
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b))7
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))7
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))7
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b))7
Front Position lamp not working Both (4.2.1 (a))6
Rear brake disc in such a condition that it is seriously weakened5
Fuel cap ineffective (6.1.3 (b) (i))5
Brake performance unable to be tested (1.2.1 (g))5
Brake performance not tested (1.2.1 (g))4
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))4
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))4
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii))4
Nearside Footrest missing (6.2.12 (a))4
Front Position lamp not working BOTH (4.2.1 (a))4
Front Brake lining(s) less than 1.0 mm thick (1.1.13 (a))4
Front Shock absorber has negligible damping effect (5.3.2 (b))4
Front Brake disc contaminated (1.1.14 (b))4
Front brake disc in such a condition that it is seriously weakened4
Headlamp insecure (4.1.1 (c))4
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))3
Handlebar grip insecure to handlebar (2.2.1 (d) (ii))3
Nearside Front Direction indicator not working (4.4.1 (a) (ii))3
Rear Brake disc contaminated (1.1.14 (b))3
Rear Rear reflector missing (4.8.2 (a) (ii))3
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii))3
Position lamp not working (4.2.1 (a))3
Rear Brake caliper insecure (1.1.16 (c) (i))3
Front Wheel alignment incorrect which adversely affects the steering (2.4 (a))3
Wheel bearing rough when rotated (5.1.3 (b) (i))3
Rear reflector missing (4.8.2 (a) (ii))3
Nearside Stop lamp not working (4.3.1 (a) (ii))3
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a))3
Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Rear Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))3
Front Direction indicator incorrect colour Both (4.4.3 (a))3
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))3
Rear Shock absorber has negligible damping effect Both (5.3.2 (b))3
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))3
All direction indicators not working (4.4.1 (a) (ii))3
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))3
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))3
Front Wheel excessively distorted (5.2.2 (c) (i))2
Throttle operating incorrectly (6.2.7 (a) (i))2
Nearside Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))2
Rear Brake disc insecure (1.1.14 (a) (ii))2
Steering linkage ball joint has excessive play (2.1.3 (b) (i))2
Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii))2
Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))2
Rear Wheel bearing rough when rotated (5.1.3 (b) (i))2
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii))2
Rear Wheel bearing has excessive play (5.1.3 (a) (i))2
Nearside Rear Shock absorber insecurely attached (5.3.2 (a) (i))2
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))2
Indicator switch inoperative (4.4.2 (a) (ii))2
Offside Brake lever has insufficient reserve travel (1.1.2 (a))2
Handlebar retaining device loose (2.2.1 (b) (i))2
Headlamp not working on main beam (4.1.1 (a) (ii))2
Wheel alignment incorrect which adversely affects the steering (2.4 (a))2
Fork yoke in such a condition that steering control is adversely affected (2.2.2 (d) (ii))2
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))2
Shock absorber has negligible damping effect (5.3.2 (b))2
Rear Shock absorber has a serious fluid leak (5.3.2 (b))2
Offside Rear Direction indicator not working (4.4.1 (a) (ii))2
Rear Brake excessively binding (1.2.1 (f))2
Front Brake caliper insecure (1.1.16 (c) (i))2
Front Horn not working (7.7 (a))2
Rear Brake grabbing severely (1.2.1 (c))2
Shock absorber likely to become detached (5.3.2 (a) (ii))2
Front Brake grabbing severely (1.2.1 (c))2
Headlamp not working on dipped beam (4.1.1 (a) (ii))2
Front Brake lever has insufficient reserve travel (1.1.2 (a))2
Horn sound not in accordance with requirements (7.7 (c))2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy