Most common failures | No# failures |
---|
Headlamp aim out of alignment | 27 |
Registration plate issues | 11 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Nearside Front Footrest insecure |6.2.1a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Nearside Front Headlamp incorrect colour |4.1.4 |a|| | 1 |
Offside Front Headlamp incorrect colour |4.1.4 |a|| | 1 |
Nearside Front Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
An item not tested |Manual| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Brake hose damaged | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working by front lever (4.3.1 (a) (ii)) | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Footrest insecure Both rider footpegs |6.2.1a| | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Central Rear Lower Rear suspension movement is excessively stiff shock linkage sized |2.4.A.3b| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Registration plate lamp issues | 1 |
Chain guard insecure |6.2.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Horn not working |1.7.3a| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |