Most common failures | No# failures |
---|
Registration plate issues | 6 |
Headlamp aim out of alignment | 5 |
Horn not working |1.7.3a| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake locking device missing split pin missing on pedal pivot. |3.2.A1e| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |