Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 12 |
Headlamp aim out of alignment | 11 |
Registration plate issues | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Horn not working |1.7.3a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Lower Fork yoke insecure |2.2.2 |d| |i|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Brake hose excessively deteriorated | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Handlebar mounting clamp loose both |2.1.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Stop lamp damaged and function impaired |1.3.3a| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Lower Horn not working |1.7.3a| | 1 |
Nearside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Horn not working |1.7.3a| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |