Most common failures | No# failures |
---|
Registration plate issues | 51 |
Rear reflector on motorcycle missing |1.4.1| | 48 |
Headlamp aim out of alignment | 31 |
Rear reflector missing (4.8.2 (a) (ii)) | 11 |
Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Registration plate lamp issues | 7 |
Rear reflector missing |4.8.2 |a| |ii|| | 7 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Drive chain excessively loose |6.2.1d| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Centre Rear reflector on motorcycle missing |1.4.1| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Horn not working |1.7.3a| | 3 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Horn not working (7.7 (a)) | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake indicates excessive fluctuation of brake effort 40% (1.2.1 (e)) | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Road spring mounting insecure Rear spring lockring loose (5.3.1 (a) (i)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Centre Rear Lower Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies from front brake |1.3.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies Fit new switch |1.3.1a| | 1 |
Footrest insecure retighten (6.2.12 (a)) | 1 |
Drive chain excessively tight (6.2.1d) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Stop lamp not working lever switch (4.3.1 (a) (ii)) | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Stop lamp missing (4.3.1 (a) (ii)) | 1 |
Stop lamp does not illuminate immediately a brake applies from front brake control |1.3.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride wheel/chain adjuster loose |6.2.1h| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls front brake lever (4.3.2 (a) (iii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Suspension component pin or bush excessively worn Lower shock linkage (5.3.4 (a) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp not working front control (4.3.1 (a) (ii)) | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Outer Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
All direction indicators incorrect colour |4.4.3 |a|| | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Brake locking device missing Front brake lever pivot lock nut missing. |3.2.A1e| | 1 |
Rear Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Front Horn not working (7.7 (a)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Headlamp aim headlamp deteriorated and function impaired leds fitted no clear pattern |1.2.3a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear position lamp adversely affected by the operation of another lamp indicators |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp indicators |1.3.2| | 1 |
Footrest missing both pillion footrests |6.2.1a| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Front Headlamp incorrect colour (4.1.4 (a)) | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Footrest missing |6.2.1a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Front wheel bearings have excessive free play both |2.3.5b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |