Most common failures | No# failures |
---|
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Headlamp aim out of alignment | 3 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Horn not working |1.7.3a| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Steering lock stop ineffective |2.1.3| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Direction indicators flashing less than 60 times a minute all, when lights are on & engine running |1.5.1c| | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Front wheel spindle locking nut loose |6.2.1h| | 1 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Rear Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected (5.2.2 (c) (ii)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Centre Front Lower Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |