Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Steering movement excessively notchy with the weight on the lower bearing (2.2.1a) | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Central Front Steering headbearing has excessive free play |2.2.2| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Lower Brake locking device missing |3.2.A1e| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |