>

MOT History from tests of petrol YAMAHA FJR1300As year 2003

Review the list of common YAMAHA FJR1300A failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:88.90%
(The average a petrol YAMAHA FJR1300A year 2003 passes without issue)
Based on:937 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment18
Nearside Front shock absorber seal failed and leaking oil |2.3.3|8
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))4
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Offside Front shock absorber seal failed and leaking oil |2.3.3|3
Stop lamp remains on when the brake is released |1.3.1e|3
Front Stop lamp not working (4.3.1 (a) (ii))3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Horn not working |1.7.3a|2
Front Valve stem seriously damaged (5.2.3 (j))2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Stop lamp remains on when the brakes are released2
Registration plate issues2
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Offside Front Brake disc contaminated (1.1.14 (b))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Offside Rear Lower Floor brake test indicates a sticking brake brake pivot seized up stripped and cleaned and greased |3.3.C2c|1
Offside Front Upper Floor brake test indicates a sticking brake pivot on prake leaver incorect and seized pepaired and lubed |3.3.C2c|1
Offside Front Upper Stop lamp remains on when the brake is released seized, pivot |1.3.1e|1
Offside Rear Outer Stop lamp remains on when the brake is released pivot seized up so light remaing on |1.3.1e|1
Rear Valve stem seriously damaged (5.2.3 (j))1
Stop lamp not working (4.3.1 (a) (ii))1
Nearside Rear Direction indicator not working |1.5.1c|1
Rear Plate brake test indicates a binding brake |3.3.B1a|1
Offside Rear Brake caliper cracked (1.1.16 (a) (i))1
Steering headbearing has excessive free play |2.2.2|1
Offside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Brake caliper cracked |1.1.16 |a| |i||1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front shock absorber seal failed and leaking oil both seals leaking. |2.3.3|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Rear Brake excessively binding (1.2.1 (f))1
Rear All position lamps not working (4.2.1 (a))1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear reflector on motorcycle missing |1.4.1|1
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Rear Brake disc|s| has excessive run out |3.2.A1m|1
Rear Brake component cracked and seriously reduced in strength |3.2.A1|1
Stop lamp does not illuminate immediately a brake applies for front brake |1.3.1a|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Front Wheel bearing so rough it is likely to overheat or break up bearings rumble when rotated (5.1.3 (b) (ii))1
Front Wheel bearing play so excessive it is likely to break up front bearings have excessive free play (5.1.3 (a) (ii))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))1
Nearside Front Brake disc|s| excessively worn |3.2.A1l|1
Offside Front Brake disc|s| excessively worn |3.2.A1l|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Brake disc fractured two small cracks in the rear disc (1.1.14 (a) (ii))1
Front Lower Front shock absorber seal failed and leaking oil |2.3.3|1
Brake pedal cannot be released smoothly |3.1.3d|1
Seat insecure |6.2.1a|1
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Shock absorber has a serious fluid leak both front |5.3.2 |b||1
Rear Shock absorber has a serious fluid leak has bad corrosion (5.3.2 (b))1
Rear Stop lamp remains on when the brake is released brake light switch adjusted to function correctly. |1.3.1e|1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front position lamp incorrect colour |1.1.2a|1
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Offside Front Shock absorber has a serious fluid leak contamination of brake disc |5.3.2 |b||1
Rear Brake caliper|s| insecure |3.2.A1j|1
Brake performance not tested |3.3|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Inner Front Fairings insecure and likely to impede the steering |2.1.2e|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
An item not tested |Manual|1
Stop lamp not working hand (4.3.1 (a) (ii))1
Central Front Upper Headlamp not working on main beam (4.1.1 (a) (ii))1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Rear Brake pedal insecure (1.1.2 (e) (i))1
Central Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Front Plate brake test indicates a binding brake |3.3.B1a|1
Rear Seat insecure |6.2.1a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy