| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Front Brake excessively binding (1.2.1 (f)) | 2 |
| Offside Front Brake excessively binding (1.2.1 (f)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Brake pipe excessively corroded | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear suspension component cracked |2.4.A.1a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Throttle operating incorrectly throttle sticks not returning (6.2.7 (a) (i)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls foot brake not functioning correctly (4.3.2 (a) (iii)) | 1 |
| Offside Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Offside Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Valve stem seriously damaged REAR |5.2.3 |j|| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Nearside Rear Direction indicators not working bad contact |1.5.1c| | 1 |
| Front Brake pipe excessively damaged |3.2.B2a| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Fuel cap ineffective Cannot be opened (6.1.3 (b) (i)) | 1 |
| Handlebar mounting clamp bolt loose Top yoke |2.1.1a| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose Rear locking device missing |3.2.A1j| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Rear Direction indicators not working rear r/h indicator not working |1.5.1c| | 1 |
| Horn missing |1.7.1| | 1 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Horn not working |1.7.3a| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking and not returning (6.2.7 (a) (ii)) | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |