| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Headlamp aim out of alignment | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Registration plate issues | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls not working with rear brake (4.3.2 (a) (iii)) | 1 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Front Brake component inadequately mounted |1.1.21 |c|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Front Suspension rod modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
| Rear Footrest missing |6.2.12 |a|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Stop lamp not working Rear Brake (4.3.1 (a) (ii)) | 1 |
| Horn not working |1.7.3a| | 1 |
| Offside Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Direction indicator incorrect colour |1.5.1b| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Registration plate lamp issues | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |