Most common failures | No# failures |
---|
Headlamp aim out of alignment | 20 |
Rear reflector on motorcycle missing |1.4.1| | 16 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 7 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Horn not working |1.7.3a| | 5 |
Registration plate issues | 4 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Headlamp aim not tested |1.6| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Wheel spoke missing |4.2.1b| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Registration plate lamp issues | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Wheel fixing missing |single fixing| front split pin missing-replaced |5.2.1 |a| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Rear Footrest missing (6.2.1a) | 1 |
Nearside Rear Wheel alignment incorrect which adversely affects the handling (2.5.1) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Front Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Steering lock stop ineffective o/s |2.1.3| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Front Position lamp switch insecure |1.1.4b| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Wheel spoke excessively corroded |4.2.1b| | 1 |
Rear Wheel spoke excessively corroded |4.2.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Steering damper ineffective |2.1.2d| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering lock stop missing |2.1.3| | 1 |
Horn control defective |1.7.2a| | 1 |
Nearside Rear Lower Drive chain excessively tight |6.2.1d| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Headlamp aim beam image kick up to the offside now masked |1.6| | 1 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
All position lamps not working all lights not working (4.2.1 (a)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Central Front Horn not working (7.7 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Horn not working (7.7 (a)) | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |