| Most common failures | No# failures |
|---|
| Registration plate issues | 10 |
| Rear reflector on motorcycle missing |1.4.1| | 8 |
| Drive chain worn to excess |6.2.1e| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Headlamp aim out of alignment | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Horn not working |1.7.3a| | 3 |
| Front Wheel spoke excessively loose |4.2.1b| | 3 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Registration plate lamp issues | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Front Position lamp not working |4.2.1 |a|| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Nearside Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls rear pedal (4.3.2 (a) (iii)) | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Rear Wheel more than one fixing missing |5.2.1 |a| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Lower Suspension arm pin or bush excessively worn relay arm (5.3.4 (a) (i)) | 1 |
| Motorcycle structure is fractured and structural rigidity is significantly reduced side stand has been modified & is seriously weakened to the point where it is likely to fail (6.1.1 (a) (i)) | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Wheel spoke missing |5.2.2 |d|| | 1 |
| Rear Wheel spoke excessively loose |5.2.2 |d|| | 1 |
| Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Wheel spoke excessively bent |4.2.1b| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Centre Front Horn missing |1.7.1| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Wheel spoke missing |4.2.1b| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |