| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Registration plate issues | 9 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Horn not working |1.7.3a| | 5 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 4 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Rear Wheel spoke excessively loose |4.2.1b| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Wheel spoke excessively loose |4.2.1b| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Horn is not continous or uniform |1.7.3c| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear reflector on motorcycle missing (1.4.1) | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Headlamp missing |1.2.3a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Upper Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Centre Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Centre Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Roller brake test indicates a binding brake rear |3.3.A1a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected |5.2.2 |c| |ii|| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Brake pedal pivot excessively worn (1.1.1 (b)) | 1 |
| Vehicle identification number not permanently displayed |6.3.5a| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Horn is not continous or uniform |1.7.3c| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Offside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Centre Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Wheel spoke missing |4.2.1b| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Rear Upper Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Upper Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Central Rear Upper Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Rear Upper Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Lower Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Central Rear Lower Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Horn is not a constant note |1.7.3c| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |