| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Front wheel bearings are excessively rough |2.3.5b| | 5 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Horn not working |1.7.3a| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Horn not working (7.7 (a)) | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Exhaust excessively deteriorated |7.1.1a| | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Handlebar mounting clamp bolt missing |2.1.1a| | 2 |
| Brake hose damaged | 1 |
| Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Brake hose which buldges |3.2.B4| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Exhaust excessively deteriorated corroded and leaking |7.1.1a| | 1 |
| Brake pedal has inadequate reserve travel foulling exhaust pipe |3.1.3b| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Front Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Brake performance unable to be tested due to excessive brake binding (1.2.1 (g)) | 1 |
| Front Steering headbearing excessively stiff or notchy Notchy (2.2.2 (f) (i)) | 1 |
| Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Stop lamp does not illuminate immediately a brake applies front |1.3.1a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| An item not tested |Manual| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Registration plate issues | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front All position lamps not working (4.2.1 (a)) | 1 |
| Front Brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Rear Wheel spindle locking device ineffective (5.2.1 (d)) | 1 |
| Rear Brake caliper has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Front Brake caliper operating mechanism has excessive travel (1.1.16 (e) (i)) | 1 |
| Rear Brake caliper inadequately mounted bolt missing from caliper support rod (1.1.16 (c) (i)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Nearside Front Shock absorber insecurely attached upper bolt (5.3.2 (a) (i)) | 1 |
| Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
| Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Offside Front Brake rod insecure caliper slider pin (1.1.15 (c)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Indicator switch faulty |1.4.A.1| | 1 |
| Registration plate lamp issues | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front Steering lock stop ineffective |2.1.3| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Stop lamp does not illuminate immediately a brake applies foot brake, rear. |1.3.1a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |