Most common failures | No# failures |
---|
Headlamp aim out of alignment | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Headlamp aim not tested |1.6| | 1 |