>

MOT History from tests of petrol YAMAHA CW50s year 2005

Review the list of common YAMAHA CW50 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:70.80%
(The average a petrol YAMAHA CW50 year 2005 passes without issue)
Based on:226 MOT Tests
Most common failuresNo# failures
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|13
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||11
Headlamp aim out of alignment9
Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Exhaust is leaking and excessively noisey |7.1.1b|4
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|4
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Rear Brake lever has inadequate reserve travel |3.1.3b|3
Offside Front Direction indicator incorrect colour |1.5.1b|3
Rear reflector on motorcycle missing |1.4.1|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Direction indicator flashing less than 60 times a minute |1.5.1c|2
Steering movement excessively stiff with the wheel raised |2.2.1b|2
Steering headbearing has excessive free play |2.2.2|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear reflector on motorcycle obscured |1.4.1|2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Stop lamp remains on when the brake is released |1.3.1e|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Registration plate issues2
Offside Rear Direction indicator not working |1.5.1c|2
Riders seat insecure |6.2.1a|2
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Headlamp not working on dipped beam intermittant |4.1.1 |a| |ii||1
Exhaust system insecure (6.1.2 (a))1
Horn is not continous or uniform |1.7.3c|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Front position lamp insecure |1.1.1c|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Brake lever insecure |3.1.2a|1
Horn not working |1.7.3a|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Shock absorber has a serious fluid leak both front shocks. (5.3.2 (b))1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Brake disc contaminated (1.1.14 (b))1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Shock absorber has negligible damping effect both fronts (5.3.2 (b))1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Brake lever has inadequate reserve travel rear brake, left hand |3.1.3b|1
Brake lever cannot be applied smoothly front brake, right hand |3.1.3d|1
Throttle operating incorrectly very slow to close (6.2.7 (a) (i))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Horn control not functioning. |1.7.2b|1
Front Direction indicators not working |1.5.1c|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Headlamp insecure |1.2.3b|1
Exhaust is leaking and excessively noisey blowing at manifold |7.1.1b|1
Nearside Rear Direction indicator damaged and function impaired |1.5.3a|1
Offside Front Direction indicator damaged and function impaired |1.5.3a|1
Front Stop lamp does not illuminate by the operation of both brake controls not working (4.3.2 (a) (iii))1
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Offside Front Direction indicator not working |1.5.1c|1
Nearside Front Direction indicator not working |1.5.1c|1
Nearside Rear Direction indicator missing |1.5.1a|1
Fairings insecure and likely to impede the steering |2.1.2e|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy