| Most common failures | No# failures |
|---|
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 9 |
| Headlamp aim out of alignment | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Horn not working |1.7.3a| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Registration plate issues | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Nearside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Shock absorber has a serious fluid leak o/s and n/s front fork seals leaking badly (5.3.2 (b)) | 1 |
| All direction indicators not working Not flashing due to battery discharged (4.4.1 (a) (ii)) | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Horn control not functioning. missing |1.7.2b| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Central Front Horn not working (7.7 (a)) | 1 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Offside Front Forks excessively corroded |2.2.2 |d| |i|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Offside Rear Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |