Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Horn not working |1.7.3a| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Suspension component damaged and seriously weakened |5.3.3 |b| |i|| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Upper Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Valve stem seriously damaged Perished (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged Perished (5.2.3 (j)) | 1 |
Registration plate issues | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Stop lamp not working with rear brake lever (4.3.1 (a) (ii)) | 1 |
Front Shock absorber has negligible damping effect forks (5.3.2 (b)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Stop lamp not working Front Control (4.3.1 (a) (ii)) | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Lower Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Direction indicator not working all |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |