Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Horn not working |1.7.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Shock absorber has negligible damping effect SEIZED SOLID (5.3.2 (b)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front suspension has excessive stiffness in the suspension movement. No movement in front suspension. |2.3.6b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Registration plate issues | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Inner Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front mudguard can easily contact the wheel |2.3.7| | 1 |