>

MOT History from tests of petrol YAMAHA CS50s year 2011

Review the list of common YAMAHA CS50 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:78.19%
(The average a petrol YAMAHA CS50 year 2011 passes without issue)
Based on:188 MOT Tests
Most common failuresNo# failures
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Headlamp not working on dipped beam |4.1.1 |a| |ii||3
Headlamp not working on main beam |4.1.1 |a| |ii||3
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||2
Exhaust is leaking and excessively noisey |7.1.1b|2
Rear Stop lamp not working |4.3.1 |a| |ii||2
Front Stop lamp not working |4.3.1 |a| |ii||2
Rear Brake lever has insufficient reserve travel |1.1.2 |a||2
Offside Rear Direction indicators not working |1.5.1c|2
Horn not working |1.7.3a|2
Front Stop lamp remains on when the brake is released |1.3.1e|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Front Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii||1
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii||1
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Central Front Headlamp aim not tested (4.1.2 (b))1
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Registration plate lamp issues1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Valve stem seriously damaged (5.2.3 (j))1
Headlamp aim not tested |1.6|1
Rear Position lamp not working (4.2.1 (a))1
Front Stop lamp not working (4.3.1 (a) (ii))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Front Steering headbearing has excessive free play |2.2.2|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Brake lever cannot be released smoothly hydraulic control sticking and not releasing . |3.1.3d|1
Rear wheel spindle securing nut|s| loose |2.4.A.2b|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear position lamp incorrect colour |1.1.2b|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Stop lamp remains on when the brakes are released1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort Doesn`t lock out. |3.3.A1c|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Direction indicator not working |1.5.1c|1
Front Brake excessively binding (1.2.1 (f))1
Front Direction indicator not working |1.5.1c|1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Brake lever insecure |3.1.2a|1
Stop lamp remains on when the brake is released |1.3.1e|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear Brake cable has restricted free movement |1.1.15 |e||1
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Rear Brake lever cracked |3.1.2c|1
Headlamp incorrect colour Bulbs blue to front of vehicle |1.2.1|1
Headlamp insecure Front panel insecure |1.2.3b|1
Exhaust is leaking and excessively noisey exhaust not secure at exhaust port |7.1.1b|1
Headlamp not working on dipped beam bulb blown (4.1.1 (a) (ii))1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Headlamp aim not tested |4.1.2 |b||1
Headlamp aim not tested Headlamp not working |4.1.2 |b||1
Motorcycle structure joining/attachment plate or fastening insecure front panel |6.1.1 |b| |i||1
Fuel system component leaking |6.1.3 |b| |i||1
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Rear Position lamp not working |4.2.1 |a||1
Direction indicator not working |1.5.1c|1
Offside Direction indicators not working |1.5.1c|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Rear Brake lever has inadequate reserve travel |3.1.3b|1
Headlamp aim out of alignment1
Front Direction indicator not working Both |4.4.1 |a| |ii||1
Offside Direction indicators flashing less than 60 times a minute flash very slow and dim |1.5.1c|1
Riders seat insecure |6.2.1a|1
Exhaust mounting missing Silencer corroded |7.1.1c|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy