Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 27 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 24 |
Headlamp aim out of alignment | 21 |
Exhaust is leaking and excessively noisey |7.1.1b| | 20 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Steering headbearing has excessive free play |2.2.2| | 14 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 13 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Registration plate issues | 7 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Headlamp insecure |1.2.3b| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Fuel cap sealing washer torn |7.2.2c| | 3 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Brake lever insecure |3.1.2a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
All direction indicators not working |4.4.1 |a| |ii|| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Wheel alignment incorrect which adversely affects the steering front forks bent back |2.5.1| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp not working at front brake lever (4.3.1 (a) (ii)) | 1 |
Nearside Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Horn not working |1.7.3a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Upper Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Nearside Brake lever cracked |3.1.2c| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
All direction indicators not working not flashing |4.4.1 |a| |ii|| | 1 |
Stop lamp not working both |4.3.1 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Lower Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Registration plate lamp issues | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Rear reflector on motorcycle missing |1.4.1| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Upper Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Brake lever pivots excessively worn |3.1.3a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicator not working Only work at tick over |1.5.1c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Brake cable excessively corroded (1.1.15 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Outer Rear Footrest missing |6.2.1a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Rear Brake lever is inoperative |3.1.3c| | 1 |
Offside Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Wheel alignment incorrect which adversely affects the handling fairings twisted |2.5.1| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |