Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Headlamp aim out of alignment | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear position lamp adversely affected by the operation of another lamp flat battery causing rear light to flash when indecators are
in use. |1.1.3b| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Horn not working |1.7.3a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Registration plate issues | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |