Most common failures | No# failures |
---|
Registration plate lamp issues | 13 |
Parking brake: efficiency below requirements |3.7.B.7| | 9 |
Mechanical brake component has restricted free movement | 6 |
Rear parking brake recording little or no effort | 5 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Rear brake binding | 4 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Headlamp not working on dipped beam |1.7.5a| | 4 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Brakes imbalanced across an axle | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Headlamp aim out of alignment | 2 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Braking system leaking |3.6.A.1| | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Horn not working |1.6.2a| | 2 |
Direction indicators not working |1.4.A.2c| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Rear brake application uneven | 2 |
Stop lamp remains on when the brakes are released | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Horn not working |1.6.2a| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Front Steering locking device missing |2.2.C.1g| | 1 |
Nearside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Offside Steering locking device missing |2.2.C.1g| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
Offside Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
Semaphore indicator switch faulty |1.4.C.1c| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Brake hose excessively deteriorated | 1 |
Offside Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear wheel cylinder leaking |3.6.A.1| | 1 |
Offside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Offside Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Offside Front Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Offside Rear Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Power steering component|s| leaking |2.3.3b| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Front brake application uneven | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Front brake excessively fluctuating | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Nearside Rear Fluid suspension pipe leaking |2.4.D.2| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Side repeater incorrect colour |1.4.A.2f| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Steering rack fractured and unserviceable |2.2.C.1d| | 1 |
Offside Front Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Nearside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Side repeater not working |1.4.A.2c| | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front All position lamps not working |1.1.A.3b| | 1 |
Rear All position lamps not working |1.1.A.3b| | 1 |
Nearside Rear Brake hose leaking |3.6.A.1| | 1 |
Nearside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Bootlid cannot be secured in the closed position |6.4.1| | 1 |
front brake recording little or no effort |3.7.B.5a| | 1 |
rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Offside Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |