Most common failures | No# failures |
---|
Brakes imbalanced across an axle | 12 |
Registration plate lamp issues | 9 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Nearside Stop lamp not working |1.2.1b| | 5 |
Indicator tell tale inoperative |1.4.A.2a| | 4 |
Front brake application uneven | 4 |
Rear brake application uneven | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Headlamp aim out of alignment | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Front Lower Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 2 |
Horn not working |1.6.2a| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
Front Service brake excessively binding both (1.2.1 (f)) | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Nearside Front Track rod end ball joint dust cover missing |2.2.C.1c| | 1 |
Nearside Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Lower Suspension arm attachment bracket/mounting cracked |2.4.G.1| | 1 |
Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Lower Stop lamp not working |1.2.1b| | 1 |
Steering box insecure |2.2.B.1a| | 1 |
Front Exhaust system not adequately supported |7.1.1| | 1 |
Front Exhaust has a major leak of exhaust gases box corroded (6.1.2 (a)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Position lamp switch insecure |1.1.A.1| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Windscreen washer not working | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Suspension arm pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
Offside Front Lower Suspension arm pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
Nearside Front Axle swivel pins and bushes swivel pin and/or bush excessively worn upper & lower trunion bushes (5.1.2 (b) (i)) | 1 |
Offside Front Axle swivel pins and bushes swivel pin and/or bush excessively worn Trunion bushes upper & Lower (5.1.2 (b) (i)) | 1 |
Nearside Front Inner Front suspension retaining device missing |2.5.A.4| | 1 |
Offside Front Lower Front suspension locking device missing |2.5.A.4| | 1 |
Nearside Outer Mechanical brake component locking device missing on lever to drum |3.5.1l| | 1 |
Offside Rear Mechanical brake component locking device missing on lever to drum |3.5.1l| | 1 |
Offside Inner Parking brake mechanism/associated mounting prescribed area is inadequately repaired os on inner chassis |3.1.9| | 1 |
Rear brake binding | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Nearside Front Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Parking brake inoperative on one side |1.4.1 |a|| | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired near leaf spring (6.2.2 (d) (ii)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Headlamp not working on dipped beam both (4.1.1 (a) (ii)) | 1 |
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |