Most common failures | No# failures |
---|
Headlamp aim out of alignment | 5 |
Brakes imbalanced across an axle | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
Nearside Rear Anti-roll bar linkage attachment bracket/mounting fractured |5.3.3 |b| |ii|| | 1 |
Nearside Front Suspension bellows leaking (5.3.5 (c)) | 1 |
Offside Front Steering column universal joint has excessive wear or play (2.2.2 (c)) | 1 |
Offside Rear Steering column universal joint has excessive wear or play (2.2.2 (c)) | 1 |
Offside Front Suspension bellows damaged or deteriorated and function is seriously affected (5.3.5 (b) (ii)) | 1 |
Offside Rear Suspension bellows damaged or deteriorated and function affected (5.3.5 (b) (i)) | 1 |
Nearside Rear Suspension bellows damaged or deteriorated and function is seriously affected (5.3.5 (b) (ii)) | 1 |
Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Central Rear Upper Emergency exit access blocked (9.1.2 (d)) | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Exhaust system not adequately supported middle |7.1.1| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (4.1.3 (b)) | 1 |
Registration plate issues | 1 |
Central Rear Inner Emergency exit sign missing |9.1.2 |b| |ii|| | 1 |
Speed limiter plate missing |7.10 |e|| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
Offside Front Steering lock stop incorrectly adjusted (2.1.4 (b)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member in front of engine (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Cross member in front of engine (6.1.1 (c) (ii)) | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
Nearside Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Emergency exit sign missing |6.2.D.3| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear Air suspension levelling valve insecure |2.4.D.4| | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Air bag |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Air bag |5.3.6 |a| |i|| | 1 |
Nearside Brake prescribed area is excessively corroded Air tank |1.1.21 |e| |i|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Front Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind n s rear wheel |6.1.1 |c| |i|| | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Nearside Rear Brake leaking air and system functionality adversely affected suspension air bag (1.1.21 (b) (ii)) | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
Rear Air/vacuum reservoir mountings/securing straps excessively corroded 1 strap missing 1 corroded |3.6.D.1a| | 1 |
Offside Front Upper Body has a sharp edge caused by damage window broken with sharp edges |6.1.C.1| | 1 |
Offside Front Position lamp missing |4.2.1 |a| |ii|| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Exhaust system not adequately supported centre flexi pipe missing |7.1.1| | 1 |
Braking system leaking nearside front brake chamber area |3.6.A.1| | 1 |
Offside Front Air suspension unit totally deflated |2.4.D.1a| | 1 |
Nearside Rear Air suspension unit totally deflated |2.4.D.1a| | 1 |
Offside Front Side repeater incorrect colour cover missing |1.4.A.2f| | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |