Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Rear brake binding | 4 |
Rear parking brake recording little or no effort | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Registration plate lamp issues | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Brake pipe excessively corroded | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Centre Braking system leaking |3.6.A.1| | 1 |
Offside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
Nearside Rear Brake slack adjuster locking device insecure |3.5.1l| | 1 |
Brake servo vacuum pipe split |3.6.C.1b| | 1 |
Nearside Windscreen wiper blade missing |8.2.2| | 1 |
Offside Front Lower Brake hose excessively damaged |3.6.B.4d| | 1 |
Offside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
Offside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Centre Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Headlamp aim out of alignment | 1 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Brake servo vacuum pipe kinked |3.6.C.1b| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Brake servo vacuum pipe collapsed |3.6.C.1b| | 1 |
Brake pipe inadequately clipped |3.6.B.1| | 1 |
Fuel system component insecure |7.2.1| | 1 |
Front Battery insecure |1.9.1| | 1 |
Brake hose excessively deteriorated | 1 |
Stop lamp not working |1.2.1b| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Brake hose leaking |3.6.A.1| | 1 |
Nearside Front front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front front brake recording little or no effort |3.7.B.5a| | 1 |
Centre Rear Exhaust mounting missing |7.1.1b| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside rear brake grabbing severely |3.7.A.5b| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Driver`s seat insecure |6.2.A.1| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Offside Front Upper Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Brakes imbalanced across an axle | 1 |