Most common failures | No# failures |
---|
Registration plate lamp issues | 6 |
Headlamp aim out of alignment | 6 |
Brake hose excessively deteriorated | 5 |
Registration plate issues | 5 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Side repeater not working |1.4.A.2c| | 2 |
Anti-lock braking system warning lamp indicates an ABS fault | 2 |
Nearside Steering rack gaiter split |2.2.D.2d| | 2 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Front Side repeater missing |1.4.A.2b| | 1 |
Offside Front Side repeater missing |1.4.A.2b| | 1 |
Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Brakes imbalanced across an axle | 1 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Rear Exhaust system insecure |6.1.2 |a|| | 1 |
Offside Front Bumper insecure |6.1.4 |a| |i|| | 1 |
Nearside Front Service brake excessively fluctuating |1.2.1 |e|| | 1 |
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
Offside Front Suspension arm pin or bush excessively worn lower arm front bush (5.3.4 (a) (i)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside Outer Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
Nearside Rear Upper Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear brake application uneven | 1 |
Nearside Rear Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Steering system excessively tight |2.2.D.1| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Steering system excessively rough |2.2.D.1| | 1 |
Nearside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
Offside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |