Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 14 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 6 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Rear parking brake recording little or no effort | 4 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Horn not working |1.6.2a| | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Brakes imbalanced across an axle | 3 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Brake pipe excessively corroded | 3 |
Brake hose excessively deteriorated | 3 |
Registration plate lamp issues | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Offside Rear Seat belt retracting mechanism defective |5.2.5b| | 2 |
Rear brake application uneven | 2 |
Rear brake binding | 2 |
Headlamp aim out of alignment | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Side repeater not working |1.4.A.2c| | 2 |
Rear Exhaust mounting missing |7.1.1b| | 2 |
Offside Rear Statutory seat belt missing |5.1.1| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 2 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Nearside Rear Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Brake valve leaking |3.6.A.1| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside rear brake excessively fluctuating |3.7.B.3| | 1 |
Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Rear Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Rear Brake valve has an excessive discharge of oil |3.6.E.1| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Outer Rear Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
Nearside Outer Rear Drive shaft which forms part of the suspension coupling gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Brake performance not tested due to corrosion |1.2.1 |g|| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Body has a projection caused by damage |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Rear Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Bootlid cannot be secured in the closed position |6.4.1| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Centre Exhaust mounting missing |7.1.1b| | 1 |
Nearside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded arch |5.2.6| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake hose has insufficient room to move | 1 |
Brake servo leaking |3.6.C.1c| | 1 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Inner Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Offside Side repeater incorrect colour |1.4.A.2f| | 1 |
Offside Front Upper Suspension component mounting prescribed area is fractured suspention top mount |2.4.A.3| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Side repeater insecure |1.4.A.2b| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Front Fuel hose leaking |7.2.3| | 1 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
Nearside Rear Seat belt buckle not functioning as intended (7.1.2 (d)) | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
Exhaust emissions carbon monoxide content excessive (7.3.B.1a) | 1 |
Nearside Front wheel bearing rough when rotated (2.5.A.2) | 1 |