Most common failures | No# failures |
---|
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Headlamp aim out of alignment | 2 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brake hose has insufficient room to move | 1 |
Nearside Rear An item not tested |Manual| | 1 |
Nearside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
An item not tested |Manual| | 1 |
Steering box has a significant oil leak |2.2.D.2e| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Outer Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Inner Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Braking system leaking MASTER CYLINDER |3.6.A.1| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Inner Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Front Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Registration plate lamp issues | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Rear Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Headlamp aim not tested |1.8.A.1c| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Offside Stop lamp emits other than a steady red light |1.2.1e| | 1 |
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Fuel cap/sealing device sealing washer torn |7.2.4c| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear wheel cylinder leaking |3.6.A.1| | 1 |
Position lamp switch faulty |1.1.A.1| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Emissions not tested |7.0| | 1 |
Brakes imbalanced across an axle | 1 |
Front brake application uneven | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |