Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Brake hose excessively deteriorated | 4 |
Offside Headlamp not working on main beam |1.7.5a| | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
Brakes imbalanced across an axle | 2 |
Horn not working |1.6.2a| | 2 |
Rear parking brake recording little or no effort | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Centre Steering pivot point has excessive play marked in chalk |2.2.B.1g| | 1 |
Nearside passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Front Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Centre Steering pivot point has excessive play |2.2.B.1g| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Outer Drive shaft which forms part of the suspension coupling gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Front Inner Drive shaft which forms part of the suspension coupling gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Front Side repeater missing x 2 |1.4.A.2b| | 1 |
Nearside Front Track rod end seriously misaligned insecure |2.1.3 |e|| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Registration plate lamp issues | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Windscreen wiper blade insecure | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.B.1| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill near attachment to front outrigger |6.1.B.2| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Rear brake binding | 1 |
Front front brake binding |3.7.B.1| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases manifold area (6.1.2 (a)) | 1 |
Front brake excessively fluctuating | 1 |
Front brake application uneven | 1 |
Front front brakes release unevenly |3.7.B.4| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |