Most common failures | No# failures |
---|
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 9 |
Brake hose excessively deteriorated | 8 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Headlamp aim out of alignment | 7 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Registration plate issues | 4 |
Rear brake binding | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Rear parking brake recording little or no effort | 4 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
Windscreen washer not working | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Battery insecure |1.9.1| | 3 |
Stop lamp not working |1.2.1b| | 3 |
Front brake excessively fluctuating | 3 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Brakes imbalanced across an axle | 2 |
Horn sounds harsh or grating |1.6.2e| | 2 |
Horn not working |1.6.2a| | 2 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Registration plate lamp issues | 2 |
Stop lamp remains on when the brakes are released | 2 |
Oil leaking excessively from engine |8.4.1 |a| |i|| | 2 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Nearside Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Offside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Front An item not tested |Manual| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Windscreen wiper blade insecure | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Brake hose damaged | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Front Seat belt stitching badly frayed |5.2.2b| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Fuel pipe so insecure there is a risk of fire fuel filter fitted in wrong direction and clipped to starter motor |6.1.3 |a| |ii|| | 1 |
Emissions not tested |8.2.1.2 |d|| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Body has a sharp edge caused by corrosion Passenger door |6.1.C.1| | 1 |
Nearside Body has a sharp edge caused by corrosion Rear passenger door |6.1.C.1| | 1 |
Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
Battery insecure x 2 |1.9.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Brake actuating linkage mounting prescribed area is excessively corroded floor/step |3.3.A.2| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Offside Obligatory mirror insecure |8.1.1| | 1 |
Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Intermediate drop arm |2.2.C.1c| | 1 |
Rear Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Headlamp switch missing |1.7.1| | 1 |
Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
front brake binding |3.7.B.1| | 1 |