| Most common failures | No# failures |
|---|
| Registration plate lamp issues | 4 |
| Brake hose excessively deteriorated | 4 |
| Windscreen wiper does not clear the windscreen effectively | 4 |
| Brake pipe excessively corroded | 4 |
| Registration plate issues | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Hazard warning switch faulty |1.4.B.1d| | 2 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 2 |
| Nearside front brake binding |3.7.B.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Headlamp aim beam image kick up to the offside |1.8| | 2 |
| Rear Rear fog lamp not working |1.3.2b| | 2 |
| Offside Steering rack gaiter split |2.2.D.2d| | 2 |
| Headlamp aim out of alignment | 2 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Offside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock |2.4.A.3| | 1 |
| Nearside Rear Torsion bar cracked |2.4.E.1a| | 1 |
| Offside Rear Torsion bar cracked |2.4.E.1a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Front Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Gear box mount |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Suspension arm mount point |6.2.2 |d| |i|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Suspension arm mount point |6.2.2 |d| |i|| | 1 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 1 |
| Offside Rear Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 1 |
| Offside Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Shock absorber mount |6.2.2 |d| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded suspension arm mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded trailing arm corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded engine mount area of chassic |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Fuel hose excessively damaged |7.2.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear brake drum insecure |3.5.1i| | 1 |
| Nearside Front An item not tested |Manual| | 1 |
| Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Inner Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Statutory seat belt missing |5.1.1| | 1 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
| Offside Front Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Rear fog lamp switch faulty |1.3.1a| | 1 |
| Brake hose damaged | 1 |
| Emissions not tested |7.0| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Radius arm corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Brake linkage has restricted free movement |3.5.1k| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Rear brake application uneven | 1 |
| Fuel system component leaking excessively or a risk of fire Spill pipes |6.1.3 |b| |ii|| | 1 |
| Main beam `tell-tale` not working |1.7.4c| | 1 |
| Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Rear brake binding | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Wheel bearing has excessive play both front (5.1.3 (a) (i)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point/sill |5.3.6 |a| |i|| | 1 |
| Windscreen has damage | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner outer arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer arch corroded |5.3.6 |a| |i|| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Nearside Rear Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded suspension mount |2.4.A.3| | 1 |
| Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Fuel hose leaking |7.2.3| | 1 |