Most common failures | No# failures |
---|
Brake hose excessively deteriorated | 4 |
Rear parking brake recording little or no effort | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Stop lamp not working All stop lamps |1.2.1b| | 1 |
Offside Brake cable has wires broken and is significantly weakened snapped on brake test |3.5.1b| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
Parking brake: efficiency below requirements |3.7.D.4| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Headlamp aim out of alignment | 1 |
Upper Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Centre Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Offside Rear Stop lamp|s| lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 1 |
Exhaust emissions hydrocarbon content excessive |8.2.1.2 |b|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp insecure |1.7.3| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front Service brake indicates brake bind |3.7.D.2a| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |