| Most common failures | No# failures |
|---|
| Offside Headlamp aim beam image kick up to the offside |1.8| | 3 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Headlamp aim out of alignment | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Brake pipe excessively corroded | 2 |
| Steering system excessively rough |2.2.D.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill section |2.4.A.3| | 1 |
| Front Fuel system component leaking |7.2.3| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement both |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear coil spring cracked |2.4.C.1a| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush wishbone bush |2.4.G.2| | 1 |
| Registration plate lamp issues | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Rear fog lamp insecure |1.3.2a| | 1 |
| Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Rear brake application uneven | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
| Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Centre Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Brake pipe leaking |3.6.A.1| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill and arch section |2.4.A.3| | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sill (7.1.1 (a) (i)) | 1 |
| Fuel hose leaking engine bay (6.1.3 (b) (i)) | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |