Most common failures | No# failures |
---|
Brake pipe excessively corroded | 4 |
Brake hose excessively deteriorated | 4 |
Horn not working |1.6.2a| | 3 |
Rear parking brake recording little or no effort | 3 |
Brakes imbalanced across an axle | 3 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Headlamp aim out of alignment | 3 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Brake pedal spongy |3.3.B.1b| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Windscreen washer not working | 2 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 2 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Registration plate lamp issues | 2 |
Brake hose damaged | 2 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Rear Brake pipe leaking on an air braking system |1.1.11 |b| |i|| | 1 |
Nearside Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Valve stem seriously damaged |4.1.D.1e| | 1 |
Offside Front Valve stem seriously damaged |4.1.D.1e| | 1 |
Nearside Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
Offside Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
Rear brake application uneven | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Fuel pipe insecure |7.2.1| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Battery insecure |1.9.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Horn not a continuous or uniform sound |1.6.2e| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Shock absorber insecure |2.7.2b| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Centre Exhaust mounting missing |7.1.1b| | 1 |
Mechanical brake component has restricted free movement | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Steering locking device missing |2.2.C.1g| | 1 |
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Brake hose has insufficient room to move | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |