| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 11 |
| Brake hose excessively deteriorated | 7 |
| Rear parking brake recording little or no effort | 6 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Parking brake: efficiency below requirements |3.7.B.7| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Headlamp aim out of alignment | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front coil spring incomplete |2.4.C.1a| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Nearside Headlamp insecure |1.7.3| | 2 |
| Registration plate lamp issues | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Parking brake: efficiency below requirements |3.7.D.4| | 1 |
| Brake hose damaged | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Brake load sensing valve seized |3.6.E.3| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front brake application uneven | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Fuel system component insecure |7.2.1| | 1 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Coil spring not correctly located |2.4.C.2| | 1 |
| Offside Front Coil spring not correctly located |2.4.C.2| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Brake hose leaking |3.6.A.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Rear brake binding | 1 |
| Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 1 |
| Driver`s seat moving inadvertently |6.2.5 |b| |ii|| | 1 |
| Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.5 |b| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury Door |6.2.1 |a| |i|| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Rear Inner Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Inner Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Offside Front Inner Integral body structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Front Upper Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Emissions unable to be completed over revving (8.2.2.2 (e)) | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
| Offside Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Offside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Exhaust mounting missing |7.1.1b| | 1 |
| Nearside Rear Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Windscreen washer not working | 1 |
| Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Windscreen wiper does not clear the windscreen effectively | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Headlamp aim not tested |1.8.A.1c| | 1 |
| Nearside Front Brake performance not tested |3.7.A.1| | 1 |
| Offside Front Brake performance not tested |3.7.A.1| | 1 |
| Nearside Rear Brake performance not tested |3.7.A.1| | 1 |
| Offside Rear Brake performance not tested |3.7.A.1| | 1 |
| Rear Exhaust mounting missing |7.1.1b| | 1 |
| Offside Rear Fuel system component insecure |7.2.1| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Nearside Front coil spring incomplete |2.4.C.1a| | 1 |
| Offside Rear Brake pipe connection leaking on an air braking system join (1.1.11 (b) (i)) | 1 |
| Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 1 |
| Headlamp not working on dipped beam both (4.1.1 (a) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear Wheel bearing has excessive play both (5.1.3 (a) (i)) | 1 |
| Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Windscreen wiper not working (3.4 (a)) | 1 |
| Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Emissions unable to be completed (8.2.1.2 (d)) | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |