| Most common failures | No# failures |
|---|
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 4 |
| Registration plate lamp issues | 4 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Driver`s seat insecure |6.2.5 |a| |ii|| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front front brake binding |3.7.B.1| | 2 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Centre Brake pipe inadequately supported |3.6.B.1| | 1 |
| Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch in front of wheel (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Nearside Rear Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Nearside Floor excessively deteriorated centre (6.2.4 (a) (i)) | 1 |
| Offside Rear coil spring incomplete |2.4.C.1a| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced behind drivers seat |7.1.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced side of drivers seat |7.1.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced drivers floor |7.1.1 |a| |i|| | 1 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced behind passenger seat |7.1.1 |a| |i|| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Exhaust emissions hydrocarbon content excessive |8.2.1.2 |b|| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 1 |
| Front Steering component mounting prescribed area is excessively corroded floor near steering shaft (2.1.2 (e) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected stabilizer arm/roll bar mounting (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (three places/holes) (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage fractured drop link snapped (5.3.3 (b) (ii)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Rear Parking brake inoperative on one side little effort (1.4.1 (a)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Brake prescribed area is excessively corroded wheel arch (1.1.21 (e) (i)) | 1 |
| Nearside Front Lower Brake prescribed area is inadequately repaired inner wheel arch (1.1.21 (e) (i)) | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 1 |
| Offside Front Upper Brake prescribed area is excessively corroded wheel arch (1.1.21 (e) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Horn not working |1.6.2a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded behind seat |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Drive shaft uj which forms part of the suspension has a loose flange bolt drive shaft inner coupling bolt insecure |2.4.G.4c| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake hose damaged | 1 |
| Inner Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Offside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear coil spring broken |2.4.C.1a| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Brakes imbalanced across an axle | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under wheel arch |5.2.6| | 1 |
| Offside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is fractured lower suspension arm |2.4.A.3| | 1 |
| Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |