Most common failures | No# failures |
---|
Horn not working |1.6.2a| | 8 |
Headlamp aim out of alignment | 7 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Windscreen washer not working | 3 |
Offside Stop lamp not working |1.2.1b| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Brake pipe excessively corroded | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Rear brake binding | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Service brake is causing the vehicle to swerve to the offside |3.7.C.2| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded bumper area |2.2.C.1h| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Rear brake application uneven | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Front Upper Trailing arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Upper Trailing arm has excessive play in a ball joint |2.4.G.2| | 1 |
Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Direction indicators not working all |1.4.A.2c| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Windscreen washer control is inaccessible to the driver control missing or not labeled |8.2.1a| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp aim not tested |1.8.A.1c| | 1 |
Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Hazard warning switch missing |1.4.B.1d| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
Rear Exhaust has a part missing |7.1.1a| | 1 |
Registration plate issues | 1 |
Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Rear Brake hose leaking |3.6.A.1| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Registration plate lamp issues | 1 |
Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |