Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Registration plate lamp issues | 7 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Fuel system component leaking |7.2.3| | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Brake hose excessively deteriorated | 2 |
Brake pipe excessively corroded | 2 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Rear brake application uneven | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Rear parking brake recording little or no effort | 2 |
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 1 |
Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Offside Rear coil spring incomplete |2.4.C.1a| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front coil spring incomplete |2.4.C.1a| | 1 |
Nearside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 1 |
Front brake application uneven | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Rear fog lamp switch inoperative |4.5.3 |a| |ii|| | 1 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Horn not working |1.6.2a| | 1 |
Registration plate issues | 1 |
Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 1 |
Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Rear Electrical wiring insecure |1.9.2a| | 1 |
Rear fog lamp switch faulty |1.3.1a| | 1 |
Rear Electrical wiring damaged and bare connector exposed |1.9.2c| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Rear Electrical wiring inadequately supported |1.9.2a| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step sill |6.1.B.2| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Rear brake binding | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
rear parking |secondary| brakes imbalanced | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Steering rack insecure |2.2.B.1a| | 1 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Brake pipe leaking |3.6.A.1| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Front Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Brakes imbalanced across an axle | 1 |