| Most common failures | No# failures |
|---|
| Registration plate lamp issues | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Headlamp aim out of alignment | 2 |
| Brake hose excessively deteriorated | 2 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 2 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Brake pipe excessively corroded | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| An item not tested |Manual| | 2 |
| Offside Steering rack gaiter split |2.2.D.2d| | 2 |
| Offside Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Front suspension has excessive play in a pin or bush of an upper wishbone inner bearing |2.5.B.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Parking brake lever ratchet mechanism is broken |3.1.5| | 1 |
| Brake pedal has excessive side movement indicating a badly worn bearing or pivot |3.3.A.1d| | 1 |
| Nearside Front Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Front Windscreen wiper blade missing |8.2.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Offside Inner Steering linkage ball joint has excessive play steering rack arm (2.1.3 (b) (i)) | 1 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Rear Drive shaft uj which forms part of the suspension has a loose flange bolt |2.4.G.4c| | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Rear fog lamp switch insecure |1.3.1a| | 1 |
| Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Registration plate issues | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Windscreen wiper does not clear the windscreen effectively | 1 |
| Offside Front Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Headlamp not working on main beam |1.7.5a| | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
| Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Wheel stud|s| missing |4.2.A.1e| | 1 |