| Most common failures | No# failures |
|---|
| Brake hose excessively deteriorated | 4 |
| Windscreen washer not working | 3 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 2 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside Front Seat belt not functioning as intended doesnt lock into stalk (7.1.2 (c)) | 1 |
| Offside Front Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Exhaust emissions carbon monoxide content excessive 8.27% (8.2.1.2 (b)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Speedometer clearly inoperative (7.8 (b) (ii)) | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Headlamp aim out of alignment | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Nearside Front An item not tested |Manual| | 1 |
| Nearside Front Upper Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Upper Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Rear fog lamp light intensity significantly reduced |4.5.4 |a|| | 1 |
| Nearside Front Upper Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Brake pipe excessively corroded | 1 |
| Nearside Front Anti-roll bar linkage attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) | 1 |
| Offside Front Anti-roll bar linkage attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Rear fog lamp switch missing (4.5.3 (a)) | 1 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 1 |
| Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Drivers seat backrest cannot be secured in the upright position. (6.2.5 (b) (ii)) | 1 |
| Battery insecure and likely to fall from carrier not clamped down and tray excessively corroded (4.13 (a) (ii)) | 1 |
| Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Steering box has excessive free play detected at the steering wheel (steering box fitted) (2.3 (a) (i)) | 1 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Parking (secondary brake) on a single line braking system imbalanced across an axle Axle 1 (1.3.1 (b) (i)) | 1 |