Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 11 |
Headlamp aim out of alignment | 11 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 11 |
Registration plate lamp issues | 6 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 5 |
Brakes imbalanced across an axle | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Brake pipe excessively corroded | 3 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 3 |
Brake hose excessively deteriorated | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Steering rack gaiter split |2.2.D.2d| | 2 |
Offside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 2 |
Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear Brake prescribed area is excessively corroded back plate (1.1.21 (e) (i)) | 2 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front All position lamps not working |1.1.A.3b| | 1 |
Offside Rear All position lamps not working |1.1.A.3b| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
An item not tested |Manual| | 1 |
Offside Rear Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Centre Fuel pipe leaking |7.2.3| | 1 |
Front brake application uneven | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Fuel system component leaking |7.2.3| | 1 |
Centre Front Brake pipe inadequately supported |3.6.B.1| | 1 |
Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Horn not working |1.6.2a| | 1 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Nearside Front Lower Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Steering component cracked and unserviceable |2.2.C.1d| | 1 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Headlamp adversely affected by the operation of another lamp nearside is on dip/offside is on main beam/and vice versa |1.7.5c| | 1 |
Nearside Rear Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arm mount (5.3.6 (a) (i)) | 1 |
Nearside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer floor to sill |5.3.6 |a| |i|| | 1 |
Offside Front Anti-roll bar linkage cracked |2.4.G.1| | 1 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch x2 |2.4.A.3| | 1 |
Front Brake pipe leaking |3.6.A.1| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Towbar mounting obviously of an inappropriate size |6.6.2| | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear brake application uneven | 1 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
Offside Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
Windscreen has damage | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Windscreen wiper blade missing |8.2.2| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear brake binding | 1 |
Rear parking brake recording little or no effort | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Steering rack insecure |2.2.B.1a| | 1 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Nearside Rear Brake prescribed area is excessively corroded back plate (1.1.21 (e) (i)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |